Our take on why so many devices ship with light bleed. Is it really inevitable?


Hey Folks!

Today we speak about the Lord Voldemort of our industry. The light leak/ bleed/ 漏光 (Lòuguāng)!

Why I decided to make this post?

Every now and then people ask why light leaks are so present in every day displays and if they can be at eliminated fully during production?

How do we know?

We had plenty of challenges with Eve V and rejected quite a lot of screen batches due to light leaks and other defects.

But first. What are the most common screen defects and what are they?

  • Light leak
  • IPS glow
  • Dead/Stuck pixels
  • Pressure stains

In this post I’ll talk about pressure stains and light leaks and if you’d like it will be a pleasure for me to tell about other defects in the next post!

What is light leak?

Light leak/ bleed is backlight shining through where it is not supposed to. Most often it can be seen on edges of the screen and in some cases as smaller spots in various areas.

What is it caused by?

Two main reasons:

  1. Misalignment of LCM layers
  2. Pressure applied during assembly

1. Slight misalignment of the layers that go into making an LCD.

LCD panel has a lot of layers to create that beautiful image(I won’t go into detail on each of them as it would require a separate post).
Picture of all layers

Backlight is at the back of the screen and it allows you to see the actual picture as otherwise you would have to use a flashlight to see anything:) if one of the layers is slightly misaligned from the edge it creates light leakage in that area.

It’s quite easy to get few screens with perfect alignment of all the layers but it is much harder when they are produced in tens of thousands.

This depends a lot on the capability of the manufacturer and their clients accepted manufacturing tolerances.

Other common types of light leak?

Pressure stains/ pressure caused light leak

looks like a small bright spot or some times similar to a normal light leak and are caused by some internal components like screws or sharp board edges in the monitor/tablet/phone pressing against some of the panel layers causing them to stretch and letting more light to go through. In some cases pressure applied at the factory by workers during assembly can cause a pressure stain.

This is a much more common problem for phones and slim laptops as manufacturers chasing every 0,1 of millimeter of thickness often times don’t consider manufacturing tolerances of all the components or temperature change for metal components and their behaviour.

So often times pressure stain is not a defect from a screen supplier like LG or Sharp but rather a design mistake or acceptance of too big of a tolerance for incoming component quality check.

How does it actually happen?

Let’s say I am a factory producing for BRAND R. My client wants to see the slimmest laptop possible at the best possible price point. We lock down dimensions of all the components and their tolerances that go into a laptop. During assembly the factory accidentally uses screws that are a a bit too long to go into assembly of a laptop back causing increased applied pressure on the screen that at time of quality check doesn’t show any problems but during shipment to the end customer problem appears as the pressure is applied for too long time.

There are other issues as well but they occur more seldom and typically manufacturers cover those.

So why when buying a monitor you are the unlucky one with a light leak?

Quality standard and cost is the answer!

Typical QC document:
testing_Page_2 testing_Page_3
Posted this for illustration purposes. Let me know if you would like to see the one we use as it’s 35 pages long:D

All of these specs can be tweaked as per client requirement. Typically all defects are categorised by importance.

Critical Issue (CR) - is the Top Priority shipping blocker kind of issue. If Major issue is discovered production stops and root cause is investigated. Example would be panel setting itself on :fire:

Quoting the Standard:

Safety issues, such as fire, smoke, electric shock, burns, scratches and other endangering personal safety issues; Seriously affect the usage, such as no display, often automatically crashes / shutdown / blue screen / restart; Damage that cannot be restored, such as parts burned, cannot boot cannot enter into the operating system (OS);

Major Issue (MA) - Severe light leak, cracks, bent surfaces and too big gaps.

Quoting the Standard:

Electronic/structural function is not achieved, such as display isabnormal, speaker output sound distorted, battery cannot be charged,the expansion interface /UI no function, buttons no function, LED indicator lights’ status is incorrect, imperfect paintwork etc.There is bias on electronic/structural function, such as the display brightness is not up to the standard, speaker volume is soft, structure gap exceeds the standard etc.

Minor Issue (MI) is a defect that customer might not notice or not encounter or has a very minor effect on the use.

Quoting the Standard:

It’s a judged as a defect, but the end user may or may not encounter it.There is little or almost no impact on end user and the customer may accept this defect. The problem is superficial or tiny, almost no effect on function, and will not affect the user experience, such as prompt information is not accurate, wrong character on non-important parts etc

Most factories handling LCD displays are capable of identifying 100% of defects! Why defected goods end up on store shelves?

Cost is the answer. :moneybag:

Let’s imagine I am a screen producer.

  • I produce 100,000 screens for my customer.
  • 1 screen costs 100 USD without defect rate considered.
  • from 1,00,000 screens 50% have no visually identifiable light leak from a typical end user viewing distance. 25% have minor light leak that can be seen. 20% have average light leak that most people would find annoying. 5% have SEVERE light leak.

As a customer I have few options:

  1. Tell manufacturer to scrap 50% of defected screens making my panel cost 200 USD
  2. Accept only minor light leak (25%) making my cost 133 USD per panel (25% of screens get rejected)
  3. Accept everything except critical issues making my cost 105 USD

Now let’s calculate the difference for each case:

  1. 100,000 x 200 (cost after defect rate) - 100,000 x 100 (what would my cost be with min standard) = 10,000,000 = 10 million USD.
  2. 100,000 x 133 (cost after defect rate) - 100,000 x 100 (what would my cost be with min standard) = 3,300,000 = 3,3 million USD.
  3. 100,000 x 105 (cost after defect rate) - 100,000 x 100 (what would my cost be with min standard) = 500,000 = 0,5 million USD.

So above is the problem! Good brand would have to pay double (in our case 10 million usd extra to achieve exceptional quality) a more typical brand would pay only 0,5 million USD.

*Some of you might think that calculation above is unfair as it does not include RMA (consumer return) costs. While it’s true! In the end of the day not so many people go for service and often times light leak is a grey zone in warranty of the product. *

The key question for the brands is how to make the correct decision?!

Let’s say I am brand A and I have no defect policy my price is 30-40% more than brand B that offers EXACTLY same spec but every second product will have an issue.

Which one would you choose?

  • I would gamble and go with Brand B
  • I would play it safe and go with Brand A
  • Other

0 voters

In the end of the day it’s all about willingness of customer to pay extra and competition’s offering!

What are your thoughts on this?!


If you go for buying 100% of the screens and do the QC by yourself you can decide where to go with the screens (the grade of light leak you want to accept). If you pay for 200.000 (accepting every issue) 100€ per piece you can maybe sell 130.000 pieces. If you pay for 100.000 (no issues) the same money (200€ per piece) you just can sell 100.000…


I would say go with A as long as you have a plan for selling off any panels that are still useable for a B-grade product. I think there needs to be a way to prevent the cost of Spectrum from including the full 30-40% increase in the price to the consumer. Making a great product at a significantly better price should still be at the forefront of what Eve does.


My thoughts is I will read the warranty very carefully it seems.


I’m already going with option A with the price of the LG monitors I’ve purchased so that is a no brainer for me.
Would you be able to sell an A model with everything defect free and a B model that is 33% less but will end up with some light leakage?
I have a feeling a lot of the <$100 monitors are rejects from higher end monitors. I might even buy an inexpensive model to hang on the wall for a security system or to put at the kids computer desk (they’ve already ruined two monitors [no I don’t have a clue how]).


Yeah I know
The problem of cost hurts my head.
When we were making films for displays, we were handing the display maker tens thousands square meter of films as compensation for defects.
I know that I can not make one without 100% defects.
I often went to Osaka for apologize.:sob:

In the old days, it cost about $200 for display surface film alone, but about $20 now?
We hated this cost competition and we withdrew.

When I was working,
Those without defects were several dozen times more expensive for professional use.

The display is particularly required to have no drawbacks for medical use.
Next is aviation use. Next for design and broadcasting.
Next, high grade model for sale to general consumer,
At the bottom, Standard model.

I think that EVE should aim at a level for designers.
You should be able to make it at a price less than $1000 now.
I would like you to make the price at $500 if possible.:wink:

Also, with the evaluation method in the video, surface defects (Scratches, transparent rubbish,etc)can not be detected, but are they all right?
↑ sorry
It was written in the specification properly

But what about measuring the size of defects by length?
I think that it is better to specify by square measure?
We used such a sheet.figure


It would be great if project Spectrum could address this in a way that responsibly tries to segregate the quality of output - using pricing so that waste is minimal. If I am editing photos or watching movies - I’m happy to pay a bit more, if I’m working on spreadsheets or written content - I’d also welcome the opportunity to pay less. Especially if that means we eliminate waste / unnecessary recycling costs.


I agree 100% with you.
There was one time I went with the cheap option. On the bright side: No defects so far.
But I think this is mainly, because I never got my product… :joy:


Well, as a user of a NEC MultiSync P242w (for medical imaging and professional use) I wouldn’t mind the premium for a 100% top notch A grade IPS panel. Especially considering the new backlight polarizer to be used on the Spectrum for increased contrast too.

I bought a cheap gaming TN panel to try 144hz g-sync compatible and what is that like and loved the gaming experience, for the actual picture, it was not terrible, but wouldn’t keep it for day to day. As soon as I read about this project, decided to return that one to Bes Buy and wait

Which approach is yours?

79% of community said one opportunity, hope it ‘ll be like that. Please inform us if you will only send us good models. Also will I have 14 days return without reason warranty as I live in EU so if problems I can return? Also if it is HDR 600 than will it have great (0,01) blacks?

1 Like

I thin the warranty is compulsory so they have no choices, but my question would be how does it work with sending back … I would assume they have to pay the transport because it would be unfair if they wouldn’t, but maybe the law doesn’t require it :confused: who knows?..

@HippedOak0608 and @Bexin our goal is to make sure that everyone gets the expected quality from Spectrum. As for the warranty we are now setting up after service network with repair centers/ retailers regionally to provide smooth warranty experience.


And what about blacks, are they 0,01? Also you mentioned bleed only at start, so will it be covered by warranty or no?

I just found out about the Spectrum two hours ago on LTT and plopped down my $100 deposit 20 minutes ago. Fingers crossed!


I never see them mentioning this which video u talking about?

1 Like

Bleed is covered by warranty but it of course depends on severity of it. As most of the bleed cant even be seen by eye as its the nature of assembly. As for blacks I think you will be reassured once you see reviews from TFT central and others!

It was on the WAN Show on Jan 31, 2019.

And I bought in even knowing that I missed the $349 window… :pleading_face:
If it ships on schedule it’ll make for a sweet b-day gift to myself. :cake:


is there any update From eve team about this topic? I did not find definitive answer how will it be with no defect policy, because most people seemed to want that.

You should check the recent updates, they mentioned that they are still defining those policies but that they will be similar to other monitor vendors

Warranty and Service

What is Spectrum’s warranty like?

The current warranty policy for Eve products can be found on our website . But as we near the shipping date we will add more Spectrum-specific terms, including things like the pixel defect policy. Expect our warranty to be in line with other monitor vendors.

Can I pay extra for a perfect pixel guarantee?

We do not exclude the possibility but have no concrete plans right now. We strive to provide pixel-perfect panels to all our customers.

1 Like